✓
Survived 10 consecutive 1.22m drops
No visible damage to the mobile phone screen · MIL-STD-810H Method 516.8 Section 4.6.5
Report No.
GZMR260702741101
Issued
Aug 04, 2026
Test Setup
How the drop was performed
SGS tested a fully finished sample (Specimen B) using the MIL-STD-810H drop procedure onto a solid wood board.
Test Parameters
Specimen
B (finished product)
Drop Height
1.22 m
Number of Drops
10
Drop Orientation
Screen facing down
Falling Ground
Solid wood board
Standard
MIL-STD-810H Method 516.8
Lab Environment
15–35 °C / 25–75 %RH
Equipment
TG-6707-X2 Drop Tester
Procedure
The 4 phases of the test
From mounting to final inspection — every step was performed by SGS technicians under standard lab conditions.
1
Specimen Preparation
The finished screen protector was installed on a mobile phone (Specimen B). The protector's release liner was removed before testing, so the substrate was directly exposed to impact.
Sample: Specimen B (finished)
Reference: SGS Ref. SZP26-036299
2
Controlled Drop
The device was positioned at exactly 1.22 m above the falling ground (solid wood board), with the screen facing down. A drop tester (TG-6707-X2) ensured the device was released in a controlled, repeatable manner.
Equipment: Drop Tester TG-6707-X2
Equipment No.: GZMR-RL-E266
3
10 Consecutive Drops
The drop was repeated 10 times consecutively onto the same solid wood board, with the device inspected between drops. The screen-down orientation was maintained throughout the test.
Repetitions: 10×
Surface: Solid wood board
4
Final Visual Inspection
After all 10 drops, the screen was examined for visible damage (cracks, chips, delamination, or functional failure). SGS documented the result photographically before issuing the final conclusion.
Inspection: Visual + photographic
Date: Aug 04, 2026
Test Documentation
Before, during, and after the test
Photographic record from the official SGS report (Page 4–5).
Original Sample B
During Test-Sample B-Drop face
Before Test — Sample B
Before Test-Sample B-Mobile phone installed
Final Observation
After 10 consecutive drops from 1.22 m onto solid wood with the screen facing down, no visible damage was observed on the mobile phone screen. The protective film remained fully intact.
Client's Requirement: No visible damage to the mobile phone screen.
Conclusion
PASS
All 10 drops · 1.22 m · MIL-STD-810H
SGS
SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch
Tier 1 global testing body · ISO/IEC 17025 accredited
Authorized Signatory: Lily Lei ·Test Period: Jul 29 – Aug 04, 2026 ·Calibration valid: 2027-06-10
More from Yizhen
Other independent certifications
Every performance claim we make is backed by an independent third-party test report.
🛡️
SGS
10 consecutive drops onto solid wood — no visible screen damage. MIL-STD-810H compliant.
💎
SGS
92.9% transmittance with ultra-low 2.2% haze. Crystal-clear display, ASTM D1003-21.
👁️
TÜV
TÜV Rheinland verified — converts harmful blue light into beneficial red light at 33% efficiency.
Ready to order certified 9H screen protectors?
Get a quote for bulk orders, OEM partnerships, or distributor agreements. All units ship with full test report documentation.
Request a Quote
